The Linear Centre is a relatively delicate precision engineered product that can be damaged by inappropriate handling. Please take care when unpacking or moving the speaker not to touch any of the drivers. Damage to a driver will at best degrade a Linear Centre’s performance and at worst result in its complete failure.

The enclosure surfaces should also be handled sympathetically. Any cleaning should only require a soft cloth, slightly dampened if necessary. Be wary of using any polishes or solvent based cleaning agents. The packaging should be retained for future use.

The Linear Centre is a relatively high sensitivity speaker that does not require a generously rated power amplifier for adequate volume levels to be achieved in an average listening room. A minimum of 25 and maximum of 175 Watts into 8 Ohms per channel is recommended. Linear Centre also offers a relatively easy load to the amplifier and does not make unusually heavy demands on its power delivery.

Specifications :

• Type: Two and a half-way, reflex loaded, time aligned speaker.
• Bass/Mid Drivers: 2 x 130mm pressed alloy cone with 32mm thermally bonded voice coil. Shielded high-power long-throw magnet system.
• HF Driver: Pre-coated textile dome with ferro-fluid cooled neodymium magnet system and rear heat sink.
• Filter Network: 3rd order at 3.1kHz, 2nd order at 275Hz
• Cabinet: 15mm MDF carcass with composite layer front panel and driver de-coupling.
• Frequency Response: 60Hz to 28kHz ±3dB
• Frequency Range: 50Hz to 28kHz @ -6dB
• Power Handling: 175W peak programme
• Amplifier Compatibility: 25 - 175 Watts into 8 Ohms
• Nominal Impedance: 8 Ohms
• Sensitivity: 91dB for 1 Watt at 1 metre
• Terminals: Gold plated bi-wire binding posts
• Dimensions (H x W x D): 180 x 620 x 200mm
• Weight: 10.5kg (single, unpacked)